Mortise video compilations | Pro Marketing Videos

Pro Marketing Related Videos

Social Media Marketing - Seo - Internet Marketing - Adwords - Social Networking - Web2.0 - Search Engine Marketing - Website Marketing - Adsense - Adsense Tips - Content Syndication Network

Pro Marketing Sponsors

You like it? Share it!

Increase your website traffic with Attracta.com

Making Mortises Using a Plunge Router
Posted by: wwgoaeditor

Video duration: 377 seconds
Global video hits: 58123

George Vondriska shows you how to setup plunge router, position it correctly on the wood to cut a perfect mortise. A WoodWorkers Guild of America (WWGOA) original video.

Related: woodworkers guild, woodworking, wodworkers, wood, george vondriska, plunge router, router, mortises

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

@MrGrammers Thanks! ...
By: wwgoaeditor. on 31 Aug 10, 12:41:22
@MrGrammers Thanks! We're glad you're enjoying the videos! be sure to check out even more videos & articles at wwgoa.com

you are a smart man ...
By: MrGrammers. on 31 Aug 10, 00:21:12
you are a smart man george vondriska!

You are the man
By: Scrap5000. on 30 Jul 10, 23:19:11
You are the man

George... Sage ...
By: OldSchoolSkill. on 17 Jul 10, 06:47:50
George... Sage advice! Good video!

@aNdYmAtTeR Thanks ...
By: wwgoaeditor. on 06 Jul 10, 13:08:55
@aNdYmAtTeR Thanks for the positive comment!

I love watching ...
By: aNdYmAtTeR. on 04 Jul 10, 16:17:11
I love watching people who know what they are doing ... very useful video!

Wow!! Usefull video ...
By: minoune86. on 07 May 10, 00:35:41
Wow!! Usefull video. Thanks a million times.

great idea , great ...
By: rudoatlas. on 23 Apr 10, 07:20:29
great idea , great work, great video .. everything is great :-)

Making the marks ...
By: DrThunder88. on 14 Apr 10, 19:44:59
Making the marks around the base of the router is a good idea. That's much easier than trying to see through the chips. Thanks!

very nice !!
By: dragonxtz. on 14 Mar 10, 01:01:47
very nice !!

If you are doing a ...
By: fonitrus. on 31 Dec 09, 21:13:56
If you are doing a one off then using the V bit is fine but a much more permanent sulution and I am amased this is not something they come from the factory, is SCRIBE a line on the router base parrallel to the fence exactly where the center of your V is. then do another perpendicular to the fence. Next time just measure off the scribed line.

LOADS of very ...
By: jAcKtHeGyPsYmOtH. on 28 Nov 09, 11:04:15
LOADS of very useful tips in here. Thanks

Thank you. very ...
By: Vervello. on 21 Nov 09, 04:54:17
Thank you. very helpful. Liked the way you got that depth without any measuring.

NICE
By: hankok87. on 15 Nov 09, 14:14:16
NICE

Excellent!! Exactly ...
By: Hoods7070. on 22 Aug 09, 09:19:12
Excellent!! Exactly what I wanted to learn - thanks!

Very, very well ...
By: stannn1000. on 16 Apr 09, 14:16:01
Very, very well presented.

Thanks, i will use ...
By: pieriepieliepielo. on 24 Mar 09, 21:56:46
Thanks, i will use this method for my next mortises!

Very informative! ...
By: C3DesignBuild. on 15 Dec 08, 21:50:40
Very informative! Thanks!

WOODWORKING - Making a Mortise - Chisel & Drill
Posted by: InTheWorkshop

Video duration: 562 seconds
Global video hits: 66979

A mortise & tenon joint is a basic technique used in joining two pieces of wood. The technique is old although the means of achieving it has changed through the years. Charles Neil shows you one of the ways he makes a mortise using a chisel and a drill. BE SAFE & Happy Woodworking!...

Related: woodworker, woodworking, charles, neil, furniture

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

I heartily ...
By: doormaker2. on 08 Jan 10, 16:27:23
I heartily recommend a Steel City mortiser. It's absolutely better than my previous favorite - the Jet. It's more stable, easy to use and easy to maintain. Powerful, easy and affordable, it doesn't get better than that.

using that block to ...
By: odmcarp. on 25 Sep 09, 04:11:36
using that block to guide the chisel is a good idea

For a given project ...
By: ef1b. on 21 Sep 09, 17:23:05
For a given project, how do you like to choose a mortising method- router, mortise chisel, drill and clean, mostise machine etc.? What aspects of the project help you decide? I'm guessing you like drill and clean because you go right from layout to cutting, no fussing with jigs and fences or test cuts.

That was very ...
By: Keynotekeith. on 04 Sep 09, 04:20:52
That was very helpful. I enjoyed that. I could of sat and watched you chip all of the rest of it out.

where do ya get a ...
By: martyboywex. on 01 Jul 09, 03:08:34
where do ya get a chisel that size, i want one of them bad boys

show us what you ...
By: trumpetflowerII. on 25 Apr 09, 10:36:36
show us what you are doing - always -

thats a great idea ...
By: URALLKUNTS. on 31 Mar 09, 23:37:40
thats a great idea for a straight chisel using that straight wooden black. ill be using a mortising machine but ill still be using your technique like they did before the power machines came along. its always good to learn different techniques in woodworking. cool.

youe the MAN!
By: HPAREUSELESS. on 02 Mar 09, 23:30:51
youe the MAN!

No doubt! Buying a ...
By: BradburyGuy. on 28 Feb 09, 03:54:27
No doubt! Buying a slot mortiser was one of the best investments I made. It allows me to easily do standard and loose tenon mortising.

After watching how ...
By: ihavetwonipples. on 01 Feb 09, 05:13:11
After watching how long it takes to make one mortise, I'm buying a mortising machine. the best 300 bucks I'll ever spend. YOU HAVE TO SPEND MONEY TO MAKE MONEY!!! amazing skills, thanks for the video.

Those are some ...
By: rv36116. on 28 Jan 09, 23:01:45
Those are some WORKIN' hands!

Personally I'd get ...
By: SuperSkyrail. on 06 Dec 08, 20:38:58
Personally I'd get "MHG" chisels, they're not too expensive considering their quality. I bought some a few months ago and was surprised how good they were, hornbeam handles and chrome vanadium blades; very very strong, and takes an edge really well! I'm not sure how available they are in the states though, since they're a German manufacturer.

Sweet
By: rockthehouse06. on 01 Nov 08, 02:16:44
Sweet

Have a 1/4 and 3/8 ...
By: TomH127. on 29 Oct 08, 01:54:27
Have a 1/4 and 3/8 hollow mortise bit that adapt to my drill press. For hard wood such as oak I start the holes with the hollow chisel mortise bit and remove most of the wood with a same diameter high speed bit in a hand drill. Demonstrated in my video Kitchen Cart Mortise

CHARLES IS THE MAN!!
By: crickey7301. on 29 Sep 08, 11:36:25
CHARLES IS THE MAN!!

Thanks, very helpful
By: wd345345. on 20 Sep 08, 13:43:06
Thanks, very helpful

I love the down to ...
By: Donegaldan. on 03 Aug 08, 05:15:37
I love the down to earth no BS way of explaining each step, complemented with that great southern accent. Thank You

I will now be able ...
By: bobbyfmax. on 05 May 08, 01:14:22
I will now be able to clean out a mortise straight and true. Great tip thanx

Amy particular ...
By: LyndonKJohnson. on 14 Mar 08, 02:35:24
Amy particular brand of chisel you recommend? Possible a preffered place to buy them(i.e. Lowes, Tractor Supply)?

Yea, makes for a ...
By: LyndonKJohnson. on 14 Mar 08, 02:32:41
Yea, makes for a real clean step. Real nice looking, I think.

Very good work. ...
By: LyndonKJohnson. on 14 Mar 08, 02:30:03
Very good work. Bravo my friend.

I do the same thing ...
By: shutupjackass. on 15 Dec 07, 06:09:03
I do the same thing on site building stairs, but I use a brad point bit and a dedicated motising chisel and a hammer. Just like your corner chisel, but I cut four surfaces at once. Makes clean fast work.

second bit was a 1/ ...
By: InTheWorkshop. on 24 Nov 07, 18:24:50
second bit was a 1/2 " brad point

What kind of bit ...
By: LilMAnderson. on 24 Nov 07, 16:19:43
What kind of bit was that second one? I love the Ryobi drill, I bought the kit and could build a house with it.

You are a ...
By: DeanRKoontz. on 17 Nov 07, 03:34:36
You are a down-to-earth individual. I applaud your candid video. Good job buddy.

How to make a Mortise and Tenon joint
Posted by: johnbullar

Video duration: 382 seconds
Global video hits: 16773

John Bullar from WOODWORKING plans and projects magazine uses hand tool techniques for mortice & tenon joints. Hand cut mortise and tenon Video in HD www.furnituremaking. org

Related: mortise and tenon, woodworking, mortice, trabajar la madera, caja y espiga, tenon et mortaise, schlitz und zapfen

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

Its easiest if you ...
By: johnbullar. on 03 Sep 10, 20:06:11
Its easiest if you make the tenon first, then you can use it to mark out the mortise

Mr. Bullar, that ...
By: THEPUMP10. on 03 Sep 10, 16:54:39
Mr. Bullar, that was an informative video, thank you. Is it your preference to make the tenon before the mortise or conventional wisdom?

great...nice ...
By: 7199715. on 28 Jul 10, 05:14:23
great...nice teaching... made furniture making look easy....thks...

Yes that works ok, ...
By: johnbullar. on 20 Jul 10, 16:20:47
Yes that works ok, keep the drill a few mm smaller than the joint

Work slowly and ...
By: johnbullar. on 20 Jul 10, 16:19:07
Work slowly and check with a square at each stage, marking, sawing chiselling.

Yes, glue inside ...
By: johnbullar. on 20 Jul 10, 16:17:28
Yes, glue inside the mortise for a permanent joint

Fourteen tpi is ...
By: johnbullar. on 20 Jul 10, 16:13:11
Fourteen tpi is usual for mortise and tenons

Thnx mr Bullar nice ...
By: MrMagsimus. on 05 Jul 10, 08:32:32
Thnx mr Bullar nice video. Can u use a drill to give u time saving to give u depth instead of chisseling for ages to cut the joint out.? Then just to finish with chisel?

whenever i make a ...
By: aidic14. on 30 Jun 10, 19:29:29
whenever i make a mortice and tennon joint my wood always seems to be twisted slightly how can i improve??

If i was building a ...
By: mikesuser. on 23 Jun 10, 02:29:00
If i was building a coffee table, would i glue the joint or anything?

I have your book! ...
By: noisepuppet. on 01 Jun 10, 15:28:31
I have your book! Nice video, thanks for the tips.

thanks really ...
By: XMagnatrixX. on 30 May 10, 04:46:16
thanks really helpful!!so the chisel must be the as the mortise

how many teeth per ...
By: k33ras. on 19 May 10, 06:17:13
how many teeth per inch is your back saw?

thx this should ...
By: f1tzy0. on 03 Feb 10, 06:42:20
thx this should help me at school cos the teacher has no idea how to do it properly. 5stars!

That was very ...
By: whig475. on 27 Jan 10, 08:58:29
That was very instructive and answered several questions I had. Thank you!

Glad you like it. ...
By: johnbullar. on 19 Jan 10, 13:49:42
Glad you like it. There is no difference between the books apart from the cover and the publisher page, so get whichever is easier or cheaper for you.

Great Videos Mr ...
By: 1sadcock. on 19 Jan 10, 05:42:04
Great Videos Mr Bullar! I noticed you have 2 different editions of your book. Can you tell me what the differences are between the American and European publications?

Excellent video, ...
By: sjdehner1. on 05 Jan 10, 23:10:07
Excellent video, extremely helpful. Thanks.

thanks really ...
By: TeenWoodworker. on 13 Dec 09, 10:53:44
thanks really helpfull

Multi slot mortising machine
Posted by: Matthiaswandel

Video duration: 343 seconds
Global video hits: 180163

woodgears.ca Demonstrating how my home made multi-slot mortising machine works, and some of the woodworking joints that can be cut with it.

Related: router, mortise, tenon, slot, wood, joinery

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

I like the artistic ...
By: szikrit. on 06 Sep 10, 19:59:53
I like the artistic idea of this mashine! It works fine, but besides it it is something to enjoy during work! Great!!!!

I'M TRYING TO BUY ...
By: elmonotigre. on 31 Aug 10, 02:50:58
I'M TRYING TO BUY THE PLANS OF YOUR MACHINE. I'M USING MY VISA CREDIT CARD. BUT YOUR SISTEM DEMAND TO ME THE PAY-PAL SISTEM. AND PAY-PAL DEMAND ME TO HAVE TWO (2) CREDIT CARDS. IN VENEZUELA THE ONLY WAY TO PAY IN USD.($) IS BY ONLY ONE CREDIT CARD. PAY PAL DON'T ALLOW ME BUY YOUR PLANS. FIRST TIME I HAVE TROUBLES TO PAY WITH. IF YOU CAN HELP ME, WRITE ME TO monkeytiger47@hotmail.com

Arquimedes, ...
By: elmonotigre. on 30 Aug 10, 19:51:31
Arquimedes, centuries ago said: give me a lever and I can move the Globe. \Years ago I took a stand wich match with my Bosch router in a vertical position. then I took a cross-vise with a movable jaw (where I clamp the work) and 2 screws with handles, like the Hugh Lyman's version.It works, but you must work slow and you must use 2 hands. Your idea is simple but genial because you can work with one hand and quickly

Why did you use ...
By: cmsmith1955. on 30 Aug 10, 00:48:38
Why did you use drawer slides for your x and y axis. Why not use the same type of set up that you have on the z axis.

if u add a tube ...
By: cotton509. on 23 Aug 10, 18:48:03
if u add a tube blowing air on the other side of the motor pointed CAREFULLY towards the suction dryer vent thing you can probably increase the saw dust suction, but im not shure as ive never done this

Sorry, URLs in ...
By: Matthiaswandel. on 23 Aug 10, 12:40:48
Sorry, URLs in comments alwaysget deleted so can't post the link. But follow the link in the description, and there will be a link to the plans on that page.

very good invention ...
By: manyp51. on 23 Aug 10, 02:50:13
very good invention, the plans plese....

great invention
By: elmonotigre. on 20 Aug 10, 16:23:30
great invention

I would like send ...
By: elmonotigre. on 20 Aug 10, 16:11:08
I would like send you my commentary, but this page do not allow to me. ask for help and is not posible

! Wow! ...
By: elmonotigre. on 20 Aug 10, 15:39:20
! Wow! Congratulations. Dramatic invention or creation

Nice stuff, and a ...
By: mrbluenun. on 15 Aug 10, 13:29:54
Nice stuff, and a great machine build! Very good design and ease of use, congrats! mrbluenun

are you an engineer ...
By: 7199715. on 31 Jul 10, 05:11:21
are you an engineer or something like that?How much time did you spend to exploit the maximum capacities of this machine?

one handed ...
By: PaulPower99. on 22 Jul 10, 04:47:08
one handed operation on the wood

Yes, slot mortisers ...
By: Matthiaswandel. on 21 Jul 10, 06:58:54
Yes, slot mortisers unfortunately are not consume type equipment, so they are quite expensive. Hollow chisel mortisers are available for consumers, but even a professional hollow chisel mortiser isn't going to do very accurate work.

I see by previous ...
By: BradburyGuy. on 21 Jul 10, 00:27:24
I see by previous comments this will be redundant, But You are a genius! People pay up to $4,000.00 for a machine like this. I purchased one from Laguna Tools for $1,000.00 and it is not as accurate for vertical measurement as yours is! Laguna does have a floor-stand mortiser similar to mine with more options and accuracy but guess what? $4,000.00.

good idea
By: kiestikas. on 17 Jul 10, 12:10:02
good idea

complimenti sei un ...
By: Yetikj. on 09 Jul 10, 22:01:56
complimenti sei un genio con il legno

my jaw is still ...
By: trancesensation23. on 09 Jul 10, 08:20:47
my jaw is still dropped even after watching the whole video.

this is very cool. ...
By: trex65ghia. on 09 Jul 10, 06:05:27
this is very cool....

Is there anything ...
By: mirtzig76. on 02 Jul 10, 22:33:01
Is there anything you can't make out of wood!?! Definitely genius!

hahah he uses wood ...
By: Bittboy. on 29 Jun 10, 08:19:59
hahah he uses wood to cut wood! xD

Excellent, ...
By: rohenwi. on 20 Jun 10, 02:10:56
Excellent, congratulations good tool, Henry de Venezuela

Excelente, te ...
By: rohenwi. on 20 Jun 10, 02:00:04
Excelente, te felicito buena herramienta, Henry de Venezuela

Excelente! Very ...
By: abeltri. on 09 Jun 10, 23:30:46
Excelente! Very impresive how accurate your machine is. What sort of motor is that? Felicitaciones Congratulations!

amazing skills
By: jlw1996. on 05 Jun 10, 20:45:55
amazing skills

router mortise jig
Posted by: jdn6863

Video duration: 180 seconds
Global video hits: 30671

diy jig for great joinery using a handheld router

Related: mortise, diy, woodworking, router, shop, tips

Display Video Comments | Hide Video Comments | Add Comment

Mortise and tenon joint accuracy
Posted by: Matthiaswandel

Video duration: 307 seconds
Global video hits: 41141

Experimenting with how accurate a mortise and tenon joint needs to be to produce a really good fit

Related: wood, joinery, joint, mortise, tenon, glue, precision

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

joint ? wheres the ...
By: Xlay16. on 21 May 10, 09:45:27
joint ? wheres the pot

@sohnrog He sells ...
By: Patriot1776. on 24 Feb 10, 03:08:32
@sohnrog He sells plans to build it. :)

*falls out of chair ...
By: Patriot1776. on 23 Feb 10, 20:33:05
*falls out of chair laughing at FroggyVector's comment*

Your joint is ...
By: mortinus00. on 07 Jan 10, 08:16:38
Your joint is accurate to the 0.001? ...amazing.

JIG MASTER!!!!!!!!
By: hankok87. on 17 Nov 09, 00:14:44
JIG MASTER!!!!!!!!

HA!, Im going to ...
By: FroggyVector. on 05 Oct 09, 05:42:32
HA!, Im going to tell my dadI It just sounds funny.:) Im taking my ball and going home. I agree this work is completely perfect!

I agree, Mathias is ...
By: qjuantum. on 05 Oct 09, 01:30:11
I agree, Mathias is DA'MAN! Im gladlly subscribed to his chanel, check out his video on the jenga gun, i bought one from him, soo much fun to play w/ my kids

New Yankee Workshop ...
By: FroggyVector. on 12 Sep 09, 14:10:05
New Yankee Workshop...Eat your heart out... Norm has nothing on this "Man Of Wood" Every Mortise and Tenon Norm cuts is pounded in with a hammer and he calls it a good fit..HA!

i learn how to do ...
By: IIGaMeSlaVe540II. on 26 Aug 09, 23:55:49
i learn how to do this in school hehe

Thanks, very ...
By: metalictempest. on 19 Aug 09, 07:48:09
Thanks, very helpful video

When are you going ...
By: sohnrog. on 18 Aug 09, 00:42:14
When are you going to start selling that jig?

damn interesting ...
By: SHADOWS113. on 15 Aug 09, 01:44:54
damn interesting stuff!!

That is a great ...
By: EPICFAILOFDOOM. on 03 Aug 09, 20:18:40
That is a great video were did you get your mortis from?

Excellent, ...
By: PartScavenger. on 31 Jul 09, 14:23:48
Excellent, excellent video

I've never been ...
By: Fralmunk. on 29 Jul 09, 06:53:20
I've never been interested in wood or anything to do with such... and I watched all five minutes, enraptured.

its your calling, ...
By: ebird97. on 28 Jul 09, 14:31:47
its your calling, work with wood from now on :-)

very accurate. good ...
By: silentsniperrr. on 28 Jul 09, 05:30:33
very accurate. good job.

I love your videos ...
By: Psycho467. on 27 Jul 09, 15:25:39
I love your videos man and all of your machines are extremely interesting. But I'm curious with what you do with the items you make. Do you use all of them, do you give some away, or do u sell any?

i say its because ...
By: zeratul575. on 27 Jul 09, 06:34:07
i say its because you never worked with it so you dont know whats possible with wood untill you see it

I've never worked ...
By: aunel2. on 27 Jul 09, 06:27:13
I've never worked with wood in my entire life. Why on earth do I find this so fascinating?

By the way, really ...
By: deezynar. on 27 Jul 09, 01:49:04
By the way, really do like your machines. One day I'll make a copy of your mortising machine, just as you have it. It's perfect. I also want to make version of your box joint jig w/ just a small modification. I'll have the sled span both sides of the saw blade. Your screw drive adjustment is great, and doing one end of all the boards in one process is totally awesome. Thanks for all your videos, I'm a real fan.

When I watched the ...
By: deezynar. on 27 Jul 09, 01:39:15
When I watched the tenon machine video, it seemed setting up the stop blocks was a little akward. A "U" stop would seem to help that step along. If I'm wrong & it's easy to do, then "Carry on!" If you think it's worthwhile investigating the "U" stop idea, I suggest these ideas to deal w/ the issues you brought up. Shape the stop's edges into a "V" to handle the lever's arc. Bit diameter difference is small & would be a fine adjustment handled by set screws. Finally, use the same saw blade.

The lever is not ...
By: Matthiaswandel. on 27 Jul 09, 01:14:12
The lever is not quite linear, so that would add some problems. Also, the mortises are not always the same width - it depends on which 1/2" bit I use, what wood, and how fast I cut. Also, I don't always use a saw blade of the same width.

I'm going to tell ...
By: Perk456. on 26 Jul 09, 23:19:59
I'm going to tell my dad about your amazing work

Matt, I love your ...
By: deezynar. on 26 Jul 09, 22:30:07
Matt, I love your machines. Since most of your mortices are cut with a router bit & are the width of the bit diameter. Why don't you make a "U" shaped block for your tenoning jig with a space between the legs that matches the router bit diameter? (Plus the lever thickness, of course) Then you don't need to make the gross adjustments on the stop blocks. Due to humidity or machine imprecisions you may need to have some set screws for fine adjustments, but they would be small & quick to make.

my mortise jig in action part 1
Posted by: jdn6863

Video duration: 180 seconds
Global video hits: 61849

see my video on making the jig. this is the jig in action making perfect, safe and error free mortises for floating tenons.

Related: mortise, jig, shopmade, jigs

Display Video Comments | Hide Video Comments | Add Comment

Old Style Mortise Lock Video
Posted by: HomeRemodelWorkshop

Video duration: 411 seconds
Global video hits: 12277

Bob Schmidt shows you an inexpensive way of removing door material to install mortise lock during your home remodeling project, to re-use old hardware.

Related: door, knob, lock, interior, exterior, hardware, deadbolt, hinges, how, to, diy, remodel, remodeling, install, installation, renovation

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

thanks for the ...
By: chion918. on 07 Aug 10, 02:22:03
thanks for the video!!!! it is really helpful to me!

you did this twice ...
By: billfromelma. on 22 Mar 10, 20:10:37
you did this twice in your career ---what the heck ---how long is that ? heck you only look about 22 yrs old ---- HEH just pulling your leg Bob ---great job --- I actually understood the whole video --- no fancy stuff just practical advice. I liked it --- I'm subscribing Thanks

Great video mate... ...
By: ah4fecksake. on 04 Mar 10, 17:48:45
Great video mate...have to hang six new doors soon so these tips helped.

I'm doing this ...
By: chloen1979. on 06 Feb 10, 00:36:18
I'm doing this exact same thing in my nyc apt. Well I'm replacing the mortise sets so the cut outs are there. Problem is they aren't big enough for the new mortise. Now I can look for a side cutting drill bit! Thanks Bob!! Great video!!

there we go, looks ...
By: jmthouston. on 11 Jan 10, 18:16:40
there we go, looks great.

greetings from ...
By: 1972abc. on 10 Nov 09, 10:25:16
greetings from australia.....i had to fit one of these mortise locks today at work..great tips

thanks! I never ...
By: KingLeroy. on 19 Oct 09, 04:54:22
thanks! I never thought of it that way!

You are very ...
By: HomeRemodelWorkshop. on 12 Oct 09, 21:50:26
You are very welcome, hope it works as well for you as it does for me! +++Bob

Great video! Thanks ...
By: KHT175. on 08 Oct 09, 23:33:39
Great video! Thanks alot.

Thanks for showing ...
By: 2BrokeG. on 25 Sep 09, 03:48:10
Thanks for showing that bit Bob. Learned something else. I have viewed about 60 of your videos and look forward to learning more ! It's like Free Classes. Thanks a lot Neighbor !

Great advice. I ...
By: MickTwin. on 27 Apr 09, 03:07:09
Great advice. I also like to clamp a piece of 1X or ply to each side of the door around the mortise area . I've done this ever since that day I blew out one of the sides of an expensive mahogony door whilst chiseling near the edge :-0 ! MickTwin

Great Vid as usual ...
By: elvis459. on 19 Jan 09, 03:01:27
Great Vid as usual but just wondering if a rasp bit wouldn't work better ?

Great video
By: JustMightBeGod. on 30 Dec 08, 18:52:55
Great video

thanks your videos ...
By: mbrns. on 30 Dec 08, 04:19:35
thanks your videos are well done

i just want to ...
By: tadjuz. on 27 Dec 08, 09:03:00
i just want to thank you for uploading your videos. i'm a new to all this and have no clue how to do repair at home. one thing i know for sure is that i need to buy a lot of tools.

If you don't mind ...
By: HomeRemodelWorkshop. on 26 Dec 08, 20:00:25
If you don't mind me asking how much does it cost to rent in your area? Are they available to rent in most rental outfits or are they difficult to find? Thanks in advance!+++Bob

I'd rather just ...
By: Aquahoma. on 26 Dec 08, 19:55:32
I'd rather just rent the jig and use a router get it done in like 5 minutes

Yet another good ...
By: 243WW. on 26 Dec 08, 07:17:25
Yet another good video Bob. I have had one of those bits for a few years now as well but only ever used if for aluminium door catches, never thought to use it for the one mortise lock I have installed, I use a router... Mine is a gold colour. Keep up the good work!

Never knew there ...
By: WaterbugDesign. on 23 Dec 08, 06:47:34
Never knew there was such a bit. I've used regular bits to do the same thing, but it doesn't work too great. I'll keep an eye out for one. Thanks Mostly I do use a sharp chisel. I got a mallet years ago made for chiseling and I have no idea why it works better than a hammer but it sure seems to.

SWT did you get my ...
By: HomeRemodelWorkshop. on 23 Dec 08, 02:32:31
SWT did you get my reply?===Bob

The tile grout bit ...
By: HomeRemodelWorkshop. on 23 Dec 08, 02:30:56
The tile grout bit works well for cutting grout at bottom of tile backsplash to replace old countertop with new!===Bob

Thanks+++Bob
By: HomeRemodelWorkshop. on 23 Dec 08, 01:22:12
Thanks+++Bob

Yes, It is a DEWALT ...
By: HomeRemodelWorkshop. on 23 Dec 08, 01:15:40
Yes, It is a DEWALT,Pretty good durability for the money! The batteries never die on my corded drills!+++Bob

Also Bob that drill ...
By: zakzak000. on 23 Dec 08, 01:02:02
Also Bob that drill you use, You seem to really love that drill! Seems like a trusty drill. Is it Dewalt by any chance? I dont see you using many Cordless in many of your vids? I love the freedom.

Cheers Bob. Looks ...
By: zakzak000. on 23 Dec 08, 00:10:51
Cheers Bob. Looks like a great bit, I normally chisel out the rest but it takes ages. I always thought those bits were a bit of a gimmick so never looked into them. I will now! Cheers!

Leigh FMT Frame Mortise & Tenon Jig
Posted by: LeighIndustries

Video duration: 441 seconds
Global video hits: 8888

Basic jig operations on the Leigh FMT

Related: woodworking

Display Video Comments | Hide Video Comments | Add Comment

Luthier Tips du Jour - Bolt on Mortise and Tenon Neck Joint
Posted by: OBrienGuitars

Video duration: 539 seconds
Global video hits: 26314

Luthier and Instructor, Robert O'Brien, shows how to make a bolt on mortise and tenon neck joint for attaching a guitar neck to the body.

Related: luthier tips du jour, obrien guitars, lutherie school, guitar building school, guitar building, mortise and tenon, guitar neck joint, lmi, luthier, guitar making

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

DID YOU EVER DARE ...
By: julioyaldonza. on 12 Jul 10, 15:25:36
DID YOU EVER DARE TO PROVE YOUR SKILLS WITH THE MYSTERIOUS RISING DOVETAIL ? PUT AN EYE TO LEARN HOW-TO AT MY CHANNEL BY CLICKING ON MY NAME AND YOU´LL GET ROY UNDERHILL TO ENVY YOU ;D !!! YOU WILL SEE MY MORTISE AND TENON ATTEMPT...ENJOY IT !!! THANKS

@johncharnock I use ...
By: OBrienGuitars. on 22 Jun 10, 13:28:42
@johncharnock I use 1/2 inch aluminum tubing and 3/8 inch threaded rod. Use a wingnut and a washer to adjust the spreader. All items are available at your local lutherie supply warehouse.

Hi Rob Do you ...
By: johncharnock. on 22 Jun 10, 09:55:25
Hi Rob Do you have any details of your spreaders that you use to hold the sides in the mold. I have some SS tube that I want to convert into spreaders and bin the turnbuckles.

@garciaorganization ...
By: OBrienGuitars. on 03 May 10, 23:51:24
@garciaorganization good luck with the build. I have a google group you might find useful. Let me know if you want access.

Great...thanks for ...
By: garciaorganization. on 03 May 10, 23:37:07
Great...thanks for the advice. I'll give it a try. Keep up the wonderful videos. I'm now encouraged to try my first build this summer. Al

@garciaorganization ...
By: OBrienGuitars. on 03 May 10, 23:31:04
@garciaorganization I prefer the bolt on mortise and tenon cause it is easier, no compound angles like a dovetail.

It looked like it ...
By: garciaorganization. on 03 May 10, 23:29:59
It looked like it would make any later adjustments easier. Other than tradition do you favor one over the other?

@garciaorganization ...
By: OBrienGuitars. on 02 May 10, 17:14:41
@garciaorganization Yes it could, but why not just use the traditional Spanish heel?

Great video. Could ...
By: garciaorganization. on 02 May 10, 15:36:48
Great video. Could this joint be used on a flamenco/nylon crossover instead of the standard classical joint? Any drawback or changes needed for that?

very important if ...
By: OBrienGuitars. on 05 Mar 10, 23:12:16
very important if you want the action to be right.

How important is it ...
By: HRRLutherie. on 05 Mar 10, 17:52:49
How important is it to angle the neck?

@OBrienGuitars amen ...
By: grilguy. on 09 Feb 10, 17:49:30
@OBrienGuitars amen to that. I must say though that it seems a bit odd to use that technic for an acoustic.

For some that ...
By: OBrienGuitars. on 16 Jan 10, 17:56:40
For some that probably is the best option. Others may find great satisfaction in making their own guitar.

And the moral of ...
By: wlwak. on 15 Jan 10, 23:45:10
And the moral of the story is.....if you want a guitar, buy it.

Can you post a ...
By: HRRLutherie. on 08 Jan 10, 19:08:43
Can you post a video on dovetails?

This is why I'm ...
By: bluestudio67. on 10 Dec 09, 14:26:49
This is why I'm starting off with a serviced kit! hehe Sergei Dejonge this fall.... there is where I'll learn the finer points.

so use a different ...
By: OBrienGuitars. on 05 Nov 09, 22:09:22
so use a different type of joint.

Why always bolt-on? ...
By: Xar0mir. on 05 Nov 09, 21:55:07
Why always bolt-on? :/ I know, it's supposed to be easier, and the neck can replaced if it should get damaged, but i'm just not a fan :/

Robbie - thanks!! ...
By: crokey64. on 27 Oct 09, 16:05:38
Robbie - thanks!! Fantastic tutorial. I've been struggling with just how to ensure the neck angle is right - you explain it very clearly.

I prefer doing it ...
By: OBrienGuitars. on 16 Oct 09, 13:43:01
I prefer doing it afterwards. With my set up I am able to cut the M&T and set the neck angle in one step.

Hi - Is there any ...
By: johncharnock. on 16 Oct 09, 11:35:22
Hi - Is there any reason you don't cut the mortise in the block before you assemble the body as in the Cumpiano method ?

did anyone else ...
By: MotherFudger27. on 10 Sep 09, 01:43:28
did anyone else here the james bond theme song stating at 8:25?

I have never had to ...
By: OBrienGuitars. on 03 Sep 09, 19:12:15
I have never had to do this repair.

I have no plans for ...
By: OBrienGuitars. on 03 Sep 09, 19:11:28
I have no plans for making this jig. I made mine by trial and error years ago and have fine tuned it over the years.

? How do you ...
By: walela1952. on 03 Sep 09, 18:39:56
? How do you replace a neck block!

lockpicking RUSSWIN mortise lock
Posted by: LockAssassin

Video duration: 56 seconds
Global video hits: 5857

picking a 6 pin russwin mortise lock using my new pick set from lockpicktools.com

Related: picking, pick, russwin, bumpkey, bumping, lockpick, lockpicking, lock, lockpicks, tension, master, security, raking, jiggling, ganzúa

Display Video Comments | Hide Video Comments | Add Comment

Frame Mortise and Tenon Jig
Posted by: wwgoaeditor

Video duration: 325 seconds
Global video hits: 5862

George Vondriska provides step-by-step instruction on how to use an FMT (Frame Mortise and Tenon) jig to cut a tenon and mortise. A WoodWorkers Guild of America (WWGOA) original video.

Related: N/A

Display Video Comments | Hide Video Comments | Add Comment

$Rob Cosman\$

Rob Cosman's Hand Cut Mortise and Tenon Trailer
Posted by: robc45

Video duration: 151 seconds
Global video hits: 52119

Instruction on hand cutting the mortise and tenon joint as well as the through wedged tenon. www.robcosman.com

Related: cosman, mark, eaton, mortise, and, tenon, woodworking, instructional, dvds, tools

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

DID YOU EVER DARE ...
By: julioyaldonza. on 12 Jul 10, 15:22:02
DID YOU EVER DARE TO PROVE YOUR SKILLS WITH THE MYSTERIOUS RISING DOVETAIL ? PUT AN EYE TO LEARN HOW-TO AT MY CHANNEL BY CLICKING ON MY NICKNAME AND YOU´LL GET ROY UNDERHILL TO ENVY YOU ;D !!! YOU WILL SEE MY MORTISE AND TENON ATTEMPT TOO...ENJOY IT !!! THANKS

Ok. Sorry that I ...
By: kmh196700. on 21 Apr 10, 11:26:30
Ok. Sorry that I thought you were being a democrat freeloader.

@kmh196700 Nice guy ...
By: virginiawoodworker. on 20 Apr 10, 19:58:28
@kmh196700 Nice guy! And if it's any of your business I've bought quite a few of his DVDs and learned a lot. Now KMA!

Yes, you may have ...
By: kmh196700. on 20 Apr 10, 16:54:40
Yes, you may have been raped. Now, how many of his dvd's have you purchased? Or, have you milked this cow online gleaning what freebies you can? You need to mind your own business b4 somebody shuts your mouth.

@kmh196700 So if ...
By: virginiawoodworker. on 20 Apr 10, 12:11:55
@kmh196700 So if you've ever bought a woodworking book, magazine or dvd you've been raped. Being new to woodworking I'm always looking for info and have found more in Rob's stuff than most others.

@kmh196700 I ...
By: fofi1955. on 14 Mar 10, 13:30:07
@kmh196700 I think you would rephrase this comment if you thought about it - Rob is a pro who makes his living at woodworking and sharing his vast knowledge - his dvd's are excellent teaching tools and no one is forced to buy them - HIs trailers are a business tool that many people use - he is not raping any poor woodworkers. You have a valid point about the free websites - I use them too as often as I may. But the comment about Rob raping poor woodworkers - unnecessary and unfounded.

There are too many ...
By: kmh196700. on 12 Mar 10, 23:30:13
There are too many websites that are free, rather than dealing with short clips from this person who is trying to rape the normally poor woodworker selling his products.

i just spent ...
By: aberdeendeltaforce. on 07 Mar 10, 01:50:04
i just spent £600.00 on a leigh m&t jig so that i could kiss goodbuy to the labourius task of chippin and sawing for days on end for a joint that is essentially hidden. i hope i never see my tennon saw again.......... as for the dude who says no glue to a m&t then i pity the people who by anything made by him.

yeah sorry woodlist ...
By: theunchasteone. on 25 Jan 10, 21:52:41
yeah sorry woodlist just re read the post! wasn't specific enough, meant that you dont have to use glue if you peg, draw bore or star nail the joint. :-)

Bullpoo! You ...
By: woodlist. on 25 Jan 10, 11:52:43
Bullpoo! You either glue, peg or draw-bore a Mortise and tenon. You can't just leave it, unless you're merely gonna look at your woodwork! WL

We should use ...
By: woodlist. on 25 Jan 10, 11:50:20
We should use whatever tools we like. Period. Fact is, you learn to use hand tools, it gives you some understanding about wood and how it behaves. Useful for when you want to move to a machine..

you shouldn't have ...
By: theunchasteone. on 26 Oct 09, 21:25:27
you shouldn't have to use glue with an m+t it's strong enough.

well, it maybe won´ ...
By: Nudelsalatbomber. on 14 May 09, 23:29:49
well, it maybe won´t take much time, but once you hit the wood with a router, you´re almost done!the point is - we have these machines, so we should use them.

Cool box at the end ...
By: goldenscales. on 01 May 09, 02:04:13
Cool box at the end! Are the plans for that available?

It is best to learn ...
By: yeahwotevaman. on 21 Apr 09, 19:12:00
It is best to learn all your joinery using hand methods even if you think that you will hardly ever use them. It is kind of like having the basic foundation that gives you the 'feel' for the work. Also, you could well end up in a situation where you don't have convenient access to a functioning morticer or router.

rob rrd2 is corect ...
By: mikegriff0. on 29 Jan 09, 20:46:06
rob rrd2 is corect we need to see you cuting the wedges and what you do to the tennon its a lovely joint but still we dont know how it is cut

thats simple. say ...
By: latinoheat74. on 18 Oct 08, 13:39:51
thats simple. say you went to work abroad say in africa where there is no electricity? you will not be able to use any power tools whatsoever. so its best to learn by hand. :)

Your clip was ...
By: rrd2404. on 18 Oct 08, 02:15:50
Your clip was interesting but you asked and never answered the question "Why handcut?" What are the benefits? Also, it would have been nice if you had not skipped right over the part where you cut the tenons for the wedges and created the wedges themselves. You only showed us driving them in. How come?

Fastest Cleanest mortises.
Posted by: SolidwoodMachinery

Video duration: 8 seconds
Global video hits: 9437

Amazing mortising machine, cuts mortises superfast super clean.For more information contact Mark Hennebury: mark@solidwoodmachin ery.com or visit our website: www.solidwoodmachine ry.com

Related: maka, maka sm6, maka sm7, maka sm8, maka stv, chisel mortiser, swing chisel mortiser, mortise machinery, mortise, mortice, cutting mortises, solidwood machinery, solidwoodmachinery

Display Video Comments | Hide Video Comments | Add Comment

Powermatic 701 Benchtop Mortising Machine
Posted by: thintz12

Video duration: 179 seconds
Global video hits: 7277

A NewWoodworker.com video review showing the features and use of the heavy-duty Powermati 701 benchtop mortiser.

Related: woodworking, tool, reviews, powermatic, 701, benchtop, mortiser

Display Video Comments | Hide Video Comments | Add Comment

Frank Klausz Cutting A Mortise by Hand
Posted by: ANFaith

Video duration: 584 seconds
Global video hits: 5219

Frank Klausz at the Woodworking in America conference ( woodworkinginamerica .com ), November, 2008. He is cutting a through mortise with a mortise chisel and showing his technique. Please pardon the lousy sound quality.

Related: chisel, frank, klausz, mortise, technique, woodworking

Display Video Comments | Hide Video Comments | Add Comment

Mortise lockset demo, part 1.
Posted by: jimster586

Video duration: 254 seconds
Global video hits: 1621

Ever wondered what a mortise lock is, or what goes on inside? Here are the answers!

Related: mortise, lock, lockset, locksmith, emtek, emhart, demo

Display Video Comments | Hide Video Comments | Add Comment

Mortising Machine Setup & Use
Posted by: WoodworkersJournal

Video duration: 593 seconds
Global video hits: 691

Field Editor Chris Marshall reviews Benchtop Mortisers in the August 2010 issue of Woodworker's Journal - in this video, he shows you to set up and use one of those machines, plus a trick you won't find in the owner's manual!

Related: woodworking, woodworker, mortising, mortise, mortiser

Display Video Comments | Hide Video Comments | Add Comment

Mortise lockset demo, part 2.
Posted by: jimster586

Video duration: 275 seconds
Global video hits: 1026

Thermwood Benz Aggregate Lock Mortise Machining
Posted by: BobCNCautomation

Video duration: 628 seconds
Global video hits: 838

Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35